濟南推拉蓬結構工程施工過程中，有時會遇到陰雨天氣。雨天施工應注意哪些事項，確保施工呢？讓我們一起來看看吧。

During the construction of Jinan sliding roof structure project, rainy weather is sometimes encountered. What should be paid attention to during construction in rainy days to ensure safe construction? Let's have a look.

1.在雨天施工時，應設置臨時避難所。雨不應落在熱焊縫上。如焊接處潮濕，需在焊接前用干布擦拭，并用氧乙炔火焰擦拭，以保持焊接處干燥，無殘留濕氣。

1. Temporary shelters shall be provided for construction in rainy days. Rain shall not fall on hot welds. If the welding place is wet, it shall be wiped with dry cloth and oxyacetylene flame before welding to keep the welding place dry and free of residual moisture.

2.吊裝過程中，若部件上有積水，應在安裝前，但不得損壞涂層。安裝高強度螺栓接頭時，部件的摩擦面應清潔，無水滴，不得接觸雨水、污垢、油污等污物。

2. During hoisting, if there is water on the parts, it shall be removed before installation, but the coating shall not be damaged. When installing high-strength bolt joints, the friction surfaces of the components shall be clean, free of water drops, and shall not be exposed to rain, dirt, oil and other contaminants.

3.濟南推拉蓬結構工程構件不能在雨天涂裝。

3. The structural components of Jinan Sliding Canopy cannot be painted in rainy days.

4.濟南推拉蓬不得在雨天和5級以上大風天氣施工。

4. Jinan sliding awning shall not be constructed in rainy days or windy weather above level 5.

5.雨天，由于空氣潮濕，焊條應存放在防潮烘烤中。同一覆蓋電極重復烘烤次數不得超過兩次，管理人員應及時做好烘烤記錄。

5. On rainy days, due to the humid air, the welding rods should be stored in the damp proof baking. The repeated baking times of the same covered electrode shall not exceed two times, and the management personnel shall timely make baking records.

6.推拉蓬工程在雨天和大風天氣工作時，對柱、主梁、支座等大型構件應立即進行修正，位置修正后應立即進行固定，防止單側失穩。當天安裝的組件應形成空間穩定體系。

6. When the sliding roof works in rainy and windy weather, the column, main beam, support and other large components shall be corrected immediately, and fixed immediately after the location correction to prevent unilateral instability. Components installed on the same day shall form a space stability system.

此外要檢查推拉蓬裝置的安裝情況。作為濟南推拉蓬支架的基礎設施，各單元需要我們仔細檢查膜單元的邊界與附著結構是否連接正確。

In addition, check the installation of the sliding roof device. As the infrastructure of Jinan sliding roof support, each unit requires us to carefully check whether the boundary of the membrane unit is correctly connected to the attachment structure.

制造過程中的材料和粘貼痕跡要清晰，各種施工區域和精度要達到相關標準，這樣膜單元才能更好的連接，從而使整體結構更加完善。更多相關事項就來我們網站http://m.cnqingdu.com咨詢了解吧！

The material and pasting traces in the manufacturing process should be clear, and the various construction areas and precision should meet the relevant standards, so that the membrane units can be better connected and the overall structure can be more perfect. Come to our website for more information http://m.cnqingdu.com Ask and understand!